✪ fully assembled and ready to use
✪ analog video glitcher
✪ rca and 3.5mm i/o
✪ patchable
✪ active circuits:
✬ enhancer w/ gain, feedback 1 and 2
✬ sync separator
✬ sync mixer w/ two switchable low pass filters
✪ passive circuits:
✬ 3 mixers / attenuators
✪ pal / ntsc / secam
owner's manual
the mismatcher01 contains three different analog circuits, Sync Separator, Sync Mixer and Enhancer that can be interconnected to create various effects.
this compact analog video glitcher features three circuits, enhancer, sync mixer and sync separator with various controllable parameters for each, as well as three passive mixers / attenuators.
Video inputs, such as cameras or VCRs, and outputs, such as monitor, can be connected to the MisMatcher01 trough three RCA jacks.
The user interface provides users with various 3.5mm patch point, enabling them to interconnect different parts of the circuit together for a vast array of effects.
---// faq //---
q: what's the keychain splitter for?
a: the keychain splitter is used as a two 4-way splitters. it enables you to split your signal to various parts of the circuit at the same time. for example, if you need to connect the same camera to the enhancer and the sync separator, the keychain splitter let's you split that one camera signal into two or more patch cables.
q: what's the bare minimum equipment I need to use the mismatcher01?
a: all you need is a video camera, console, vcr or dvd player with a composite video output (yellow rca jack), a tv screen with composite input and a few 3.5mm ts patch cables.
q: can i use the mismatcher01 with other pieces of video equipment, like for example, an edirol v4?
a: yes, if it can handle composite video, it'll work with the mismatcher01.
if you have any questions, contact me on
